Roofing for porches, dormers, bump-outs and additions, tied neatly into the main roof with proper flashing and matching materials.
Additions and porches create new roofs that must join the old one without leaks. Valleys, step flashing and tie-ins are where the details matter. Owners in Nashville adding a porch, dormer or room call us to build roofs that match the home and keep water out. Low-slope porch roofs often call for different materials than the main roof, and we explain the options.
We begin with a Free Estimate and review the plans or the existing structure. We select materials that match or complement the main roof, choose suitable underlayment for low slopes, install metal valleys and step flashing and tie the new roof into the old with care. For flat or low-slope porches we recommend membrane or metal systems. We coordinate with builders and carpenters so the roof goes on at the right time. Matching an addition to an existing roof takes thought. Shingle colors weather, rooflines shift, and small differences in pitch can change how a section looks. We bring samples, look at the home from the street and suggest details such as matching ridge caps and drip edge. The goal is an addition that looks like it was always part of the house.
The junction between old and new roofs is the most leak-prone spot, so we flash it carefully.
Low-slope porches need materials designed for them, not standard shingles.
Color, profile and edge details are chosen so the new section looks like part of the house.
We schedule around framers, siders and gutter crews for a clean result.
Drag the handle to compare.
BeforeAfterRoof sections and pitches studied.
Matching or complementary choices made.
Barrier layers and metal installed.
New sections roofed.
Old and new joined.
Joints and edges checked.
Every topic has its own page with what to expect and how we approach it.
ResourceTARCA statewide association for roofing contractors and suppliers that shares education, news and legislative updates for the Tennessee…Learn more 
ResourceMetro CodesThe local department that handles building permits, inspections and code questions for Nashville and Davidson County.Learn more 
ResourceHOVERA service that turns smartphone photos of a house into 3D models and measurements used for roofing, siding…Learn more Enter your measurements to see roof squares and shingle bundles, siding area and gutter lengths to plan for.
You tell us what you see or what you want to change, and we set a visit that fits your day.
We inspect the roof and attic, measure, photograph details and talk through your goals and budget.
You review materials and colors with real samples and receive a plain written scope before anything is ordered.
We protect landscaping, set up debris control and schedule permits, deliveries and crews.
We remove the old roof, repair the decking, install underlayment, flashing and roofing and finish ventilation.
We sweep the yard with a magnet, haul away debris, walk through the finished work with you and share photos.
Many shingles need a minimum slope. We recommend metal or membrane for lower pitches.
We match closely, though weathering can show differences at first.
Yes, with careful valley and wall flashing.
Yes. We coordinate schedules and details.
With step flashing, valley metal, underlayment laps and careful sealing.
New Roof InstallationBrand-new roofs for additions, rebuilt structures and homes where the old roof is being completely replaced with a…Explore 
Flat and Low-Slope RoofingMembrane and built-up roof systems for flat porches, additions, modern homes and small commercial buildings, with careful drainage…Explore 
Metal RoofingSteel and aluminum roofing in panels and profiles that shed water, resist wind and fire and last for…Explore 
Roof Flashing RepairRepair and replacement of step flashing, valley metal, wall flashing and drip edge, the metal details that keep…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
